E-FLITE BLADE 500 3D BNF / RTF
Geplaatst: 13 Nov 2012, 09:55Alweer een topklasse helicopter uit de E-FLITE BLADE reeks verdeeld door HORIZON HOBBY
EFLITE BLADE 500 3D RTF : BLH1800
Key Features
E-flite® G210HL micro heading lock MEMS gyro
425mm carbon fiber main blades
Single-piece, carbon side frames
CNC-machined aluminum head block
CNC-machined aluminum swashplate
Triple ball bearing-supported hardened steel main shaft
Spektrum™ S300 digital servos with S400G digital tail servo
E-flite® 520H 1320Kv brushless motor
E-flite 6S 22.2V 2900mAh 30C Li-Po battery
E-flite 70A S-BEC speed control
Spektrum DX6i 6-channel DSMX® transmitter with batteries
- The Blade® 500 3D RTF is designed to give intermediate-to-experienced pilots the most powerful, ready-to-fly Blade experience available. It comes out of the box assembled and equipped for aggressive 3D with an E-flite® 520H, 1320Kv brushless motor and a high-output 6S 30C Li-Po battery. This awesome power is complemented by the kind of state-of-the-art electronics and engineering you would expect to find in more expensive kits that take hours to build. You simply charge the battery, install the main rotor blades and fly.
Product Specifications
Type : Electric 500-size collective-pitch helicopter
Main Rotor Diameter : 38.2 in (969mm)
Tail Rotor Diameter : 7.8 in (198mm)
Gross Weigh t : 4.06 lb (1.84 kg)
Length : 33.5 in (850mm)
Main Gear Ratio : 10.4:1
Tail Ratio : 4.66:1
Motor Size : 520H
Kit/ARF/RTF : RTF
Control System : CCPM 120
Rotor Blade Length : 425mm
Experience Level : Intermediate
Recommended Environment : Outdoor
Is Assembly Required : No
Needed to Complete : Nothing !
Everything you need to get in the air is included in the box
E-FLITE BLADE 500 3D BNF BASIC : BLH1850
Key Features
Ideal for pilots ready to transition to high-performance 3D helis
Engineered for aggressive 3D flight
Belt-driven tail rotor with weighted tail blade hardware
Spektrum™ AR6210 6-channel DSMX® receiver installed
E-flite® 520H 1320Kv brushless motor installed
E-flite 70A S-BEC brushless ESC installed
E-flite G210HL micro heading lock MEMS gyro installed
Requires 6S 2800–3000mAh 30C Li-Po battery with charger, sold separately
- The Blade® 500 3D BNF Basic is designed for intermediate-to-experienced heli pilots who want a big, powerful 3D machine they can simply bind to their DSM2®/DSMX® transmitter and fly. It comes out of the box equipped for aggressive 3D with an E-flite® 520H 1320Kv brushless motor. This awesome power is complemented by the kind of state-of-the-art electronics and engineering you would expect to find in more expensive kits that take hours to build.
Product Specifications
Type : Electric 500-size collective-pitch helicopter
Main Rotor Diameter : 38.2 in (969mm)
Tail Rotor Diameter : 7.8 in (198mm)
Gross Weight : 4.06 lb (1.84 kg)
Length : 33.5 in (850mm)
Main Gear Ratio : 10.4:1
Tail Ratio : 4.66:1
Motor Size : 520H
Kit/ARF/RTF : BNF Basic
Control System : CCPM 120
Rotor Blade Length : 425mm
Minimum Age Recommendation : 14 years
Experience Level : Intermediate
Recommended Environment : Outdoor
Is Assembly Required : No
Needed to Complete : Recommended
6+ channel DSM2- or DSMX-compatible comptuer transmitter with helicopter programming
22.2V 6S 2800-3000mAh 30C Li-Po battery
6S Li-Po balancing charger
Prijzen : vanaf rond de 600,00 EUR voor de BLADE 500 3D BNF BASIC : BLH1850 : uitvoering
Prijzen : vanaf rond de 900,00 EUR voor de BLADE 500 3D RTF : BLH1800 : uitvoering
EFLITE BLADE 500 3D BNF BASIC : BLH1850 : filmpje : http://www.horizonhobby.com/products/bl ... ic-BLH1850
nb : TOPIC : BLADE 500 3D BNF/RTF : is vanzelfsprekend ondervoorbehoud van eventuele wijzigingen/fouten
mvg
bvwhelicopter
EFLITE BLADE 500 3D RTF : BLH1800
Key Features
E-flite® G210HL micro heading lock MEMS gyro
425mm carbon fiber main blades
Single-piece, carbon side frames
CNC-machined aluminum head block
CNC-machined aluminum swashplate
Triple ball bearing-supported hardened steel main shaft
Spektrum™ S300 digital servos with S400G digital tail servo
E-flite® 520H 1320Kv brushless motor
E-flite 6S 22.2V 2900mAh 30C Li-Po battery
E-flite 70A S-BEC speed control
Spektrum DX6i 6-channel DSMX® transmitter with batteries
- The Blade® 500 3D RTF is designed to give intermediate-to-experienced pilots the most powerful, ready-to-fly Blade experience available. It comes out of the box assembled and equipped for aggressive 3D with an E-flite® 520H, 1320Kv brushless motor and a high-output 6S 30C Li-Po battery. This awesome power is complemented by the kind of state-of-the-art electronics and engineering you would expect to find in more expensive kits that take hours to build. You simply charge the battery, install the main rotor blades and fly.
Product Specifications
Type : Electric 500-size collective-pitch helicopter
Main Rotor Diameter : 38.2 in (969mm)
Tail Rotor Diameter : 7.8 in (198mm)
Gross Weigh t : 4.06 lb (1.84 kg)
Length : 33.5 in (850mm)
Main Gear Ratio : 10.4:1
Tail Ratio : 4.66:1
Motor Size : 520H
Kit/ARF/RTF : RTF
Control System : CCPM 120
Rotor Blade Length : 425mm
Experience Level : Intermediate
Recommended Environment : Outdoor
Is Assembly Required : No
Needed to Complete : Nothing !
Everything you need to get in the air is included in the box
E-FLITE BLADE 500 3D BNF BASIC : BLH1850
Key Features
Ideal for pilots ready to transition to high-performance 3D helis
Engineered for aggressive 3D flight
Belt-driven tail rotor with weighted tail blade hardware
Spektrum™ AR6210 6-channel DSMX® receiver installed
E-flite® 520H 1320Kv brushless motor installed
E-flite 70A S-BEC brushless ESC installed
E-flite G210HL micro heading lock MEMS gyro installed
Requires 6S 2800–3000mAh 30C Li-Po battery with charger, sold separately
- The Blade® 500 3D BNF Basic is designed for intermediate-to-experienced heli pilots who want a big, powerful 3D machine they can simply bind to their DSM2®/DSMX® transmitter and fly. It comes out of the box equipped for aggressive 3D with an E-flite® 520H 1320Kv brushless motor. This awesome power is complemented by the kind of state-of-the-art electronics and engineering you would expect to find in more expensive kits that take hours to build.
Product Specifications
Type : Electric 500-size collective-pitch helicopter
Main Rotor Diameter : 38.2 in (969mm)
Tail Rotor Diameter : 7.8 in (198mm)
Gross Weight : 4.06 lb (1.84 kg)
Length : 33.5 in (850mm)
Main Gear Ratio : 10.4:1
Tail Ratio : 4.66:1
Motor Size : 520H
Kit/ARF/RTF : BNF Basic
Control System : CCPM 120
Rotor Blade Length : 425mm
Minimum Age Recommendation : 14 years
Experience Level : Intermediate
Recommended Environment : Outdoor
Is Assembly Required : No
Needed to Complete : Recommended
6+ channel DSM2- or DSMX-compatible comptuer transmitter with helicopter programming
22.2V 6S 2800-3000mAh 30C Li-Po battery
6S Li-Po balancing charger
Prijzen : vanaf rond de 600,00 EUR voor de BLADE 500 3D BNF BASIC : BLH1850 : uitvoering
Prijzen : vanaf rond de 900,00 EUR voor de BLADE 500 3D RTF : BLH1800 : uitvoering
EFLITE BLADE 500 3D BNF BASIC : BLH1850 : filmpje : http://www.horizonhobby.com/products/bl ... ic-BLH1850
nb : TOPIC : BLADE 500 3D BNF/RTF : is vanzelfsprekend ondervoorbehoud van eventuele wijzigingen/fouten
mvg
bvwhelicopter
